A slection of pre-painted latex wounds that are used to create realistic fake injuries. Stick the latex wound to the skin with spirit gum. The prosthetic appliance may be coloured using makeup if desired. Add some stage blood to complete the effect. Great for Halloween special effects makeups!
Woochie Latex Prosthetic Pieces
These Woochie Prosthetics are fantastic for giving a realistic effect! They are all a light beige colour and additional stage makeup and stage blood (not included) are recommended to achieve a more realistic effect. Additional Spirit Gum and Remover (not included) are suggested to attach the pieces. A customer favourite during the Halloween season.
Kryolan Cold Foam Noses
Realistic looking artificial noses made from Cold Foam SF. These prosthetics are high quality for use in Film, TV and Stage makeups.
Kryolan Latex Horns
Pre-painted latex prosthetic horns, great for adding 3D special effects to your fantasy makeup. Especially popular for Halloween.
Kryolan Dracula Teeth
A great option for Halloween. Set of 4 gelatin fangs for fancy dress. Applied by softening for a few seconds in a cup of boiling water, then moulding onto the teeth. The fangs will stay in place and slowly dissolve, lasting for approximately two hours. Instructions are included with the product.
Four teeth from gelatine.
Tinsley 3D Transfers
These are easy to apply special effects temporary tattoos. Tinsley Transfers are self blending and have no need for any glues or messy adhesives. FX Transfers look extremely real and contain no latex.
Sealer is a clear synthetic liquid used for protection over special effects makeup products like latex, foam, wax models, putty noses, chins and other prosthetic pieces. Use a brush to apply thinly over wax models, and for a border of 1 cm beyond the model onto the bordering skin. Allow to dry, and then apply powder. As needed, Kryolan Sealer can be diluted with Kryolan Spirit Gum Remover or alcohol.
Makeuplus Liquid Latex Clear
Multi-functional liquid latex (liquid rubber), often called slip rubber. Apply to stretched skin for aging, extreme blisters and wounds. Excellent for sealing Nose & Scar Wax or moulding prosthetic appliances. Dries clear for transparent effects.
Kryolan Liquid Latex Clear
Kryolan liquid latex contains a low ammonia content. It is used to create latex appliances such as noses, chin parts and bald caps. It can also be used to simulate aged skin or create injured skin such as burns and cuts. It dries clear.
Tip: It is best to use fingers or an old brush as it will destroy brushes if not cleaned immediately.
Not tested on animals
Kryolan Liquid Latex Dyed
Coloured to mimic skin tone, Kryolan Dyed Liquid Latex is used to create small latex appliances such as noses, chin parts, and bald caps. It can also be used to simulate aged or injured skin like burns and cuts. Dyed Liquid Latex has a low content of ammonia.
Tip: Use fingers or an old brush to apply the latex, it will destroy brushes if not cleaned immediately after use.
Not tested on animals
Kryolan Old Age Stipple
A latex preparation for simulating aged, wrinkled skin. Stretch the skin between thumb and index finger, and apply Old Age Stipple with a small latex sponge. Allow to dry, then carefully apply powder. Repeat this procedure until the desired effect is achieved. To colour to match skin, use Rubber Mask Grease Paint. For removal, Old Age Stipple can be peeled off the skin.
Kryolan Glatzan Bald Cap
A thin but tear-resistant plastic bald cap, made from the liquid bald cap material Glatzan. Available in 2 sizes, small and large. The Glatzan Bald Cap is placed onto the model and cut to fit the head. The edges are then secured with Mastix Spirit Gum, beginning with the forehead, then the nape of the neck, and finally at the temples and at the ears. When the plastic cap sits correctly, the edges can be smoothed out with thickened latex or Eyelash Adhesive, before makeup is applied. Whilst any makeup can be used, we strongly recommend using special greasepaint for rubber items. As final step, Translucent Powder is carefully applied to the make-up.
Kryolan Latex Bald Cap
Strong and reusable, made by craftsmen with natural latex by spray processes, this bald cap is available in two sizes; small and large. Cut the cap to size and secure with Mastix Spirit Gum. Smooth out the edges with latex or Eyelash Adhesive, then makeup with Rubber Mask Grease Paint. Finally, set with Translucent Powder. Art 2501
Kryolan Latex Bald Cap (Flesh Tone)
Strong and reusable, made by craftsmen with natural latex by spray processes, this bald cap is available in two sizes; small and large. Cut the cap to size and secure with Mastix Spirit Gum. Smooth out the edges with latex or Eyelash Adhesive, then makeup with Rubber Mask Grease Paint. Finally, set with Translucent Powder. Size large.
Kryolan Bald Cap Mold Block
Bald Cap Mold Block for producing artificial bald caps made from Glatzan. Suitable for two sizes: 55 and 57 cm. Apply Glatzan evenly onto the Mold Block and repeat if necessary to achieve the desired thickness of the bald cap.
Kryolan Release Agent Aerosol 400ml (DG 2.1)
Mold Release Spray is a separator in spray form, for a great variety of uses. It is particularly effective in applications with cold foam and gel-foam.
Cine-Wax is a special effects product for the creation of small 3D effects, easy to use and blend into the skin. It is recommended that Kryolan Sealer is applied over the Cine-Wax once the desired effect has been achieved, to make it stronger and firmer and thus more likely to last. It is easily removed from the skin by simply scraping off.
Tip: if you find your fingers get a bit sticky whilst molding the wax, apply a little vaseline to your fingers.
Not tested on animals
Kryolan Plastici Wax
A tinted soft wax for modelling noses, chins or facial contours on body surfaces. May also be used to block out eyebrows, create scars and change contours. Must be coated with a sealer.
Kryolan Nose Putty
A wax stick composition for altering the shape of the nose. Fingers should first be moistened with a little water or gel to prevent putty from sticking, then knead in hand until pliable. Can be adhered to the skin with Spirit Gum.
Gelatine foam for making soft flexible 3D appliances. Heat carefully in microwave until melted. Pour into mould then close. Powder when removing.
Artex is ideal for the creation of 3D skin effects such as wounds, scars and burns – and for concealing unwanted skin anomalies. Carefully mix equal parts (1:1) and apply to the skin. You can create the desired effect immediately after application. The curing process begins after 5-6 minutes. Once the plastic substance has dried, create the desired colour design. As soon as the product is set changes are no longer possible. The final effect can be made up with Kryolan’s grease paint or Body Illustration Color. To create a natural complexion mix Flocking into Artex. Apply powder to set. Artex remains flexible on the skin and can be removed by simply pulling it off. Artex is odourless. To prevent drying out, be sure to carefully close the container after every use. Store Artex in a cool and dry place. Store only in original packaging container. This is a special effects product, and not a cosmetics item. Keep away from children.
Tip. Do not contaminate the jars. Use separate spatulas for each jar.
Not tested on animals
Kryolan Cold Foam two part Kit
Produces a soft foam suitable for facial and body appliances. A very simple and short process. The average prostheses requires 25 minutes to cure and the mould is ready to be used again immediately. Cold foam kit will produce six times the amount mixed.
Kryolan Alginate DE 450g
A professional impression material for production of negatives with exact details. Scalp hair must be covered by a bald cap, eyelashes and body hair should be lightly covered with make-up remover. For making a facial impression, about 250 g of Alginate DE is mixed with cold water. Stir by hand quickly and vigorously, until a creamy mass is produced. The material allows a working window of around 5 minutes for mixing and taking the impression. Use both hands to apply Alginate DE, in such a way that approximately an equal amount is always being applied at any one time on both sides. Be sure not to apply Alginate DE in such a way as to close the model’s nostrils. After the mixed Alginate DE has been completely applied, it must then be reinforced with plaster bandages. As soon as the plaster has set, carefully remove the Alginate impression from the skin, and then immediately fill it with plaster. This produces the final positive. After the positive has completely hardened throughout, remove the Alginate negative and dispose of it properly. It cannot be used again.
Kryolan Glatzan Matt 500ml (DG 3)
A cult favourite in the special effects makeup industry, Glatzen is a liquid plastic for easy creation of quality ridgeless bald caps with fine edges. For use on specially designed plastic and porcelain head blocks. Glatzan Matt is used for the two final coats over previlous layers to create a matt finish for film and television uses.
Kryolan Glatzan L (DG 3)
A cult favourite in the special effects makeup industry, Glatzan L is a liquid synthetic material for creation of ultra-thin bald caps. In a well-ventilated room, Glatzan is thinly and uniformly applied by brush to a head form and allowed to dry. After the surface has dried, this procedure should be repeated at least three times, in order to reach the required material thickness. The outer borders of the cap, however, should consist of only 1 or 2 layers, to provide an especially thin edge for fine transitions. After application of the last layer, the bald cap should be allowed to thoroughly dry all the way through (for 6-12 hours). It can then be thoroughly powdered and carefully removed from the head form. The removal process should start at the nape of the neck and then proceed slowly in the direction of the forehead. Bald caps created in this way should be used only after the fumes have completely dispersed, and after there is no greatly noticeable smell of solvent.
Kryolan Flocking Colour Additive
Flocking is an additional colour additive powder made from very fine polyamide fibres. This product is suitable to use in special effects makeup mediums to simulate a natural skin complexion. Add a little amount of Flocking into Artex, Gel-Foam or other transparent or semi-transparent carriers in order to create fine veining of the skin.
Kryolan Rubber Mask Grease Palette 6 Colours
Rubber Mask Grease in a practical palette with 6 colours. Rubber Mask Grease is a grease-based product with exceptional opacity and adherence. Best used for colouring latex pieces like artificial noses, chin pieces, casualty simulations or rubber bald caps. This palette can be individually refilled with Rubber Mask Grease Refills. To apply the product evenly a sponge is moistened in a little alcohol (e.g. Spirit Gum Remover and Thinner). This way Rubber Mask Grease allows a smooth, easy, and even thin application. Just like other grease-based make-up, the Rubber Mask Grease should be fixed by using Translucent Powder.
Kryolan Body Illustration Makeup Colour Compact
Body Illustration Make-up Color (BIC) is a compact alcohol make-up that allows the artist to create special colour effects on the skin, like simulations of skin, arteries, veins, injuries with colour anomalies, and tattoos. BIC is ideal for painting prosthetic pieces made of silicone and also Cine-Wax and other wax components. After drying, Body Illustration Make-up Color is smudge- and waterproof. BIC should be applied with a BIC Activator moistened brush. After picking up some color BIC needs to be applied rapidly to prevent it from drying on the brush. Hydro Make-up Remover Oil is recommended for easy removal. Body Illustration Make-up Color is also available in palettes.
Kryolan BIC Activator 100ml (DG3)
BIC Activator is a solvent to activate Body Illustration Make-up Color. Moisten a brush with BIC Activator and pick up some colour from your Body Illustration Make-up Color. Apply at the desired area of the skin. The make-up will be smudge- and rub-proof after drying.
Kryolan Spatula Metal
A staple for any makeup artist's kit, a flat ended mixing spatula made from metal. Ideal for hygienic mixing and moving of various products before application. Used mainly with cream products like foundations and lipsticks.
Kryolan Cat Tongue-Flat Spatula
A double ended Metal Modeling Tool ideal for modeling work or other make-up artists creations. One end is flat and the other is curved and pointed.
Ben Nye Silicone Tool
Silicone modelling tool, excellent for shaping modelling waxes or putties and filling in gaps in prosthetics with adhesive paste.
Scarecrow Vampire Fangs
Don't settle for anything less than the industry best! Scarecrow Vampire Fangs can fit either canines and/or incisors or bottom teeth. On-the-spot customizing to ensure a good fit. Fast, easy, comfortable, and REUSABLE! Everything you need is included, no additional utensils and no boiling water necessary. Once customized, fangs fit with a unique mould of your tooth inside that allows you to snap them on or off, quickly and easily (no thermoplastic partial plate around adjacent teeth)
Stay in the know to get special offers, free giveaways and once-in-a-lifetime deals.